Stability Requirement
Mathematical convergence in hyperbolic partial differential equations depends on the relationship between spatial and temporal discretization. Courant condition establishes a limit for the maximum allowable time increment relative to the grid size and the wave speed. If the calculation exceeds this threshold, the simulation becomes unstable and the results diverge.
Solver stability requirements govern the physics of fluid dynamics and structural vibration analysis.
Numerical Limit
Calculation of the dimensionless value known as the Courant-Friedrichs-Lewy number provides the primary metric for stability. A value less than or equal to one typically ensures that information does not travel across the mesh faster than the numerical solver can resolve. When the courant condition is violated, errors grow exponentially and destroy the accuracy of the solution.
Stability is verified by comparing the physical wave velocity against the grid step and the time increment.
Propagation Rate
Physical wave speeds determine the boundary for the temporal step. In a material with a high bulk modulus, sound waves travel quickly and necessitate a much smaller interval. The courant condition forces the integrator to stay within the domain of dependence of the physical system.
Every cell in the model must satisfy this constraint to maintain global stability throughout the duration of the analysis.
Mesh Interaction
Refinement of the spatial mesh has a direct impact on the computational cost. As the element size decreases, the courant condition dictates a proportional reduction in the time step. This leads to a geometric increase in the number of cycles and the total computation time required to reach a specific end time.
Researchers balance the need for high spatial resolution against the temporal limits imposed by the solver architecture. Reducing the grid size by half requires a time step that is also halved, effectively doubling the work for each dimension. High resolution models often require thousands of steps to capture a single millisecond of physical event time.