Definitional Standard
Dimensional characterization of the non-planar deformation of a free-standing semiconductor wafer represents the foundational method for assessing stress-induced curvature. Silicon manufacturing relies on bow metrology to evaluate the spherical distortion of substrates prior to lithographic processing. This quantification uses the distance from the median surface of an unstressed wafer to a reference plane.
Reference Baseline
Metrological verification of substrate flatness requires a three-point kinematic mount to establish the primary reference plane. This allows bow metrology to run without thickness interference.
Operational Practice
Capacitive sensor arrays measure the distance to the wafer surface from fixed upper and lower probe assemblies. This dual-sided scanning cancels out localized variations in substrate thickness. Low-stress calibration standards with traceable spherical profiles are used to verify sensor response.
The measured curvature yields the mechanical stress generated during thin film deposition.
Measurement Uncertainty
Gravitational sag introduces systematic error that changes based on the orientation of the substrate. Horizontal mounting creates a downward deflection that must be mathematically compensated or avoided by vertical positioning. Optical interferometry provides an alternative non-contact option when capacitive probes encounter interference from highly conductive surface patterns.
This ensures that the measured warp remains a true representation of substrate geometry.