Digital Filter
Decimation of a high frequency bitstream into a lower rate multi bit output is typically performed by a series of integrators and differentiators. A sinc3 filter provides a third order attenuation characteristic that suppresses quantization noise from delta sigma modulators. The name refers to the mathematical sinc function used in the frequency domain.
Output resolution increases with the oversampling ratio while the passband remains relatively flat.
Frequency Response
Noise attenuation is achieved by averaging multiple samples from the input modulator. The sinc3 filter architecture uses three stages of accumulation followed by three stages of differencing. This structure creates zeros in the frequency response at multiples of the output data rate.
Rejection of high frequency noise components happens automatically without the need for complex coefficient multipliers. The resulting frequency profile allows for precise measurement of slow moving signals in industrial environments.
Latency Penalty
Processing time through the filter stages introduces a delay in the control loop. A sinc3 filter has a group delay that is exactly three times the decimation period divided by two. This lag must be accounted for in high speed motor control or power conversion applications.
Reducing the oversampling ratio decreases latency at the cost of signal quality.
Decimation Ratio
Frequency of the output data is determined by the clock rate of the modulator and the filter stages. A sinc3 filter provides a trade off between the noise floor and the sampling speed. Filter parameters are chosen to optimize the settling time for specific control loop requirements.