Insulation Medium
An amorphous layer of grown or deposited dielectric material provides electrical insulation between the high-voltage and low-voltage regions of an integrated circuit. This thin film, acting as a silicon dioxide barrier, exhibits high chemical stability and exceptional dielectric strength. It is commonly employed in capacitive digital isolators to prevent the flow of dc and ac leakage currents.
Dielectric Strength
The material withstands electric fields of up to several hundred volts per micrometer before experiencing electrical breakdown. This high limit allows the insulating layer to be very thin, which minimizes signal delay across the barrier. Testing is performed with short-duration high-voltage pulses to verify the integrity of the layer.
These tests confirm that the barrier can survive transient overvoltages from the grid.
Physical Degradation
High electric fields applied over long periods cause charge trapping and defect creation within the atomic structure of the oxide. This degradation process, known as time-dependent dielectric breakdown, leads to a sudden increase in leakage current and ultimate barrier failure. The rate of this wear-out depends heavily on both the applied voltage and the operating temperature of the silicon die.
Designers model this behavior using the E-model or 1/E model to guarantee a safe operating lifetime exceeding thirty years under nominal conditions.
Manufacturing Integration
Thermal oxidation of silicon at high temperatures produces a highly uniform and defect-free insulating layer. This process is fully compatible with standard complementary metal-oxide-semiconductor fabrication flows. The resulting integration allows protective isolation barriers to be built on the same silicon die as the active driver circuitry.