Compensation Process
Thermal adjustments account for the increase in temperature caused by the electrical power dissipated within a sensor. A self heating correction is a calculation applied to the output of resistive temperature detectors to remove the bias introduced by the measurement current. When a current passes through a sensor, it generates heat that raises the internal temperature above the surrounding environment.
Failing to account for this effect leads to a positive error in the temperature reading.
Determination Method
The correction factor is found by measuring the sensor resistance at two different current levels and extrapolating to a zero-power state. This characterization depends on the thermal conductivity of the medium in which the sensor is immersed, such as moving air or stagnant liquid. Because the dissipation constant varies with the installation environment, the correction must be verified in the field.
Operational Boundary
Low-power excitation circuits minimize the need for significant adjustment but may reduce the signal to noise ratio. Designers must balance the drive current to achieve enough resolution without inducing excessive thermal drift.
Final Calculation
The corrected value ensures that the reported temperature represents the actual process condition rather than the state of the sensor itself.