Material Quality
Concentration of trace elements in a metal wire determines its suitability for high-accuracy temperature measurements. High platinum purity is required to ensure that the electrical resistance of the sensor changes in a predictable manner. Standard sensors use metal that is ninety-nine point nine nine nine percent pure by weight.
This composition ensures that the physical properties remain stable over years of operation.
Resistance Ratio
The ratio of resistance at one hundred degrees Celsius to that at zero degrees Celsius verifies the quality of the metal. A high platinum purity corresponds to a resistance ratio of at least one point three eight five. This parameter is specified by international standards like IEC60751 for industrial sensors.
It distinguishes precision laboratory instruments from cheaper industrial-grade devices.
Contamination Effect
Foreign elements dissolved in the crystalline grid of the wire scatter conduction electrons and lower the temperature coefficient of resistance. Any decrease in platinum purity caused by oxidation or metal vapor migration will shift the sensor calibration. This shift results in a drift that undermines the accuracy of the process.
Sensor Certification
Manufacturers of primary temperature standards use chemical analysis and electrical tests to verify metal quality. They document the platinum purity on a calibration certificate that accompanies each high-precision sensor. This documentation provides traceability to international standards.