Electrical Phenomenon
Timing differences between alternating current and voltage signals arise when reactive components are present in an electrical circuit. A phase angle shift occurs when capacitive or inductive elements cause the current to lead or lag the voltage. Cryogenic sensors and their cabling introduce these reactive elements, affecting high-precision ac measurements.
Resolving this shift is necessary for separating the resistive response of the sensor from the reactive response of the system.
Impedance Effect
Alternating current measurements are sensitive to the total impedance of the circuit, which includes both resistance and reactance. The phase angle shift indicates the proportion of the total impedance that is due to capacitive or inductive effects rather than pure resistance. Long coaxial cables in a cryostat have a high capacitance, which shifts the phase of the voltage signal relative to the excitation current.
This shift reduces the sensitivity of the measurement bridge if it is not compensated. Phase-sensitive detectors in the resistance bridge measure both the in-phase and out-of-phase components of the signal. By analyzing both components, the instrument can extract the true sensor resistance.
Measurement Disruption
Uncompensated phase changes can lead to errors in the temperature calculated from the sensor resistance. The phase angle shift introduces a quadrature voltage that can overload the input stage of the lock-in amplifier. Inability to balance the quadrature signal prevents the measurement bridge from reaching a stable null point.
Noise levels in the temperature reading rise as the bridge balance degrades.
Mitigation Strategy
Cable optimization and proper frequency selection minimize the phase deviation. Selecting a lower excitation frequency reduces the reactive contribution and the resulting phase angle shift. Active compensation circuits within the measurement bridge can also balance the capacitive load of the cables.
Instrument calibration must include a phase adjustment to align the reference channel of the detector with the sensor signal.