Protective Finish
Protective coatings applied to printed circuit boards prevent the copper surfaces from oxidizing before the assembly process. Organic solderability preservative forms a thin organometallic layer through a chemical reaction between the copper and an azole-based compound. This finish offers a flat surface for component placement and is often more cost-effective than metallic alternatives.
Coating Mechanism
Adsorption of the organic molecules onto the clean copper pads creates a transparent film that acts as a barrier to moisture and oxygen. Because organic solderability preservative does not add thickness to the pads, it maintains the precise coplanarity required for fine-pitch components. The layer remains stable under normal storage conditions but dissolves quickly when it encounters flux during soldering.
Proper cleaning of the copper before application is required to ensure a continuous film.
Thermal Resistance
Multiple heat cycles during assembly can degrade the integrity of the protective film. When organic solderability preservative is exposed to reflow temperatures, the molecules may break down, leaving the copper vulnerable to oxidation during the second side assembly. Modern formulations are designed to withstand several heat excursions without compromising the final solder joint quality.
Testing often involves measuring the wetting balance after exposure to accelerated aging.
Thickness Measurement
Control of the bath concentration and dwell time determines the final depth of the film. Measuring organic solderability preservative thickness involves ultraviolet-visible spectroscopy.