Package Classification
Categorization systems define the allowable exposure time of non-hermetic semiconductor packages to ambient humidity before they must be soldered. Following moisture sensitivity levels prevents the expansion of trapped water vapor from damaging the internal structure of a component during high temperature reflow. The classification ranges from level one, which is not sensitive, to level six, which requires baking before use.
Absorption Kinetics
Plastic molding compounds used in chip packaging act as porous membranes that slowly pull moisture from the surrounding air. The rate at which moisture sensitivity levels are exceeded depends on both the temperature and the relative humidity of the storage environment. Once the saturation point is reached, the risk of delamination or the popcorn effect increases during the soldering process.
Handling Protocol
Components are shipped in dry pack bags with desiccant and a humidity indicator card to maintain their rated status. If a bag is opened and the floor life associated with specific moisture sensitivity levels is exceeded, the parts must be baked in an oven at a controlled temperature to remove the water. This recovery process must follow the duration specified by the J-STD-033 standard to avoid heat damage.
Factory Control
Software systems track the exposure time of every reel on the factory floor to ensure that no component is used after its safety window has closed.