Phase Modulation
Optical displacement sensors measure distance by comparing the phase of two coherent light beams with distinct frequencies. A heterodyne interferometer converts these high frequency optical oscillations into a manageable radio frequency beat. This transformation preserves the precision of the light wavelength while simplifying the electronic detection process.
Frequency Stability
Precision hinges on the accuracy of the frequency offset between the two optical components. Most systems use a single laser source and an acousto-optic modulator to create the required shift. Maintaining a stable beat frequency ensures that phase fluctuations are purely the result of physical displacement rather than laser drift.
Displacement Signal
Phase detection occurs when electronic receivers convert the optical interference into a sinusoidal voltage for processing by a high speed phase meter. The heterodyne interferometer produces a signal where the phase directly corresponds to the position of the moving mirror. Since the signal is ac coupled, it is inherently resistant to the intensity variations and air turbulence that degrade dc interferometry.
The phase meter uses a high resolution clock to count the zero crossings of the beat signal. Each full cycle representing a phase shift of 360 degrees corresponds to a displacement of half the laser wavelength. It yields nanometer accuracy.
Atmospheric Compensation
Changes in air temperature and pressure alter the refractive index and the apparent path length of the light. Sensors monitor these environmental factors and apply a correction factor to the measured position. Without this compensation, the accuracy of the instrument would be limited by the ambient conditions of the laboratory.