Packaging Error
Packaging-induced inaccuracy occurs when mechanical strain is applied to a semiconductor chip during the mounting process. Die stress offset manifests as a shift in the output signal that is independent of the measured physical quantity. Such errors are particularly prevalent in pressure sensors and micro-machined accelerometers.
Mechanical Interaction
Coefficient of thermal expansion mismatches between the silicon die and the substrate generate substantial forces during temperature transitions. When these forces are non-uniform, they distort the crystal lattice and change the resistive properties of the sensing elements. This piezoresistive effect can introduce a bias that exceeds the specified accuracy of the instrument.
Compensation Strategy
Calibration procedures involve mapping the output over the full operating temperature range to identify the repeatable component of the error. While a die stress offset can be partially nulled using look-up tables or polynomial fitting, unpredictable mechanical hysteresis often remains. Manufacturers use soft adhesives or compliant lead frames to isolate the sensing element from external packaging loads.
Qualification Requirement
Long term stability testing under thermal shock confirms the permanence of the mounting arrangement. A drift in the die stress offset over time indicates a failure in the mechanical integrity of the sensor assembly.