Switching Transient
Transient current flow occurring during the switching of an analog-to-digital converter input sampling switch defines a common error source in precision data acquisition. Charge kickback occurs when energy stored in parasitic capacitances of the transistor flows back into the signal source at the start of the acquisition phase. This sudden injection of charge creates a voltage disturbance that must settle before the converter captures the final value.
Signal Source
Source impedance determines the recovery time of the voltage glitch created by the switching action. High impedance drivers fail to settle within the required sampling window, leading to conversion inaccuracies that appear as gain error or distortion. Buffering the input with a high speed amplifier or adding a large reservoir capacitor helps to stabilize the node.
Compensation Method
Differential sampling architectures help cancel the common mode portion of the transient by matching the impedances of both input paths. Active compensation circuits inject an opposite charge to neutralize the effect at the sensitive input node. These techniques reduce the reliance on the external driver for high speed settling.
Settling Requirement
Settling requirements for high resolution converters dictate the maximum allowable impedance of the driving circuit to ensure accuracy.