Transducer Design
Contacting and non-contacting displacement measurement instruments record axial elongation and angular twist simultaneously on a single test specimen gauge area. Using an axial-torsional extensometer allows material testing systems to capture coupled axial strain and shear strain without mechanical interference between measurement channels. The transducer mounts directly to the gauge section using ceramic rods or spring-loaded contact points suitable for ambient and elevated temperature testing.
Measurement scope covers biaxial strain fields on cylindrical or tubular specimens and stops where non-uniform plastic necking invalidates gauge length assumptions.
Crosstalk Error
Dual-axis mechanical transducers face potential cross-axis sensitivity when axial displacement induces false torsional output or angular rotation alters axial readings. Calibration procedures for an axial-torsional extensometer isolate axial stiffness from torsional compliance using precision calibration fixtures. Decoupling flexures inside the transducer body isolate orthogonal movements.
Residual cross-sensitivity is recorded on calibration certificates to allow digital compensation.
Thermal Drift
High-temperature testing environments introduce thermal expansion along extensometer contact rods. Mounting an axial-torsional extensometer near heating furnaces requires active water cooling or ceramic extension rods to stabilize sensor bodies. Temperature shifts alter transducer spring constants and shift output baselines during long hold tests.
Strain Resolution
Precise resolution of micro-strain levels ensures accurate elastic modulus and shear modulus extraction during initial loading slopes. Calibration of an axial-torsional extensometer verifies linearity across both channels to meet specified strain accuracy standards. Transducer output feeds direct input to closed-loop servo-hydraulic controllers.